Asbestos Testing Laboratory Analysis

Asbestos Testing Bulk & Fibre Counting Analysis

Fibresafe NZ Ltd is committed to the quality, accuracy, safety and timeliness of our exerpt analytical and consultancy services.  It is our primary aim to satisfy the technical expectations and requirements of our customers and to deliver our services in a timely and effective manner.  

Our experts can test and analyse asbestos bulk materials and air monitoring samples to determine asbestos content at our onsite laboratory. Sampling for asbestos can pose a risk. Some tips and general information is provided below, however please contact us if you would like additional information or guidance.  An analysis request form can also be downloaded below. 

Laboratory

How to Submit Samples

  • Complete a Chain of Custody form. You can download one here
  • Ensure all samples are double bagged and clearly labelled. 
  • Post your samples to us at Level 1, 69 Cuba Street, Petone, Lower Hutt 5012
  • Come and see us during normal business hours 8-4:30 Monday-Friday 
  • Use the after hours dropbox at any other time 

Chain of Custody

When submitting samples for analysis, please download and complete our Chain of Custody form. 

  • Make sure all samples are double bagged using ziplock bags or similar  
  • Ensure all individual samples are clearly labelled and correspond to the information in the Chain of Custody form. 
  • Read the Terms & Conditions before submitting samples.
 

Pricing

Pricing includes GST
Commercial clients are invited to contact us for further information about rates. Additional rates apply for urgent samples.

$72.00
Per bulk asbestos sample
$138.00
Per urgent bulk asbestos sample
$165.00
For a qualified asbestos surveyor to take an asbestos sample for you. Additional samples cost $72.00 each.

Turnaround Times

Typical turn around time is 1-2 working days dependent on laboratory workload. Samples submitted with urgent priority (surcharges applicable) are prioritised and analysed as soon as possible, however no guaranteed timeframe is able to be provided. 

Taking Asbestos Samples

Not all potential asbestos-containing materials need to be taken by a specialist asbestos surveyor.  If you feel comfortable taking the sample yourself just make sure you stay safe while doing so. Fibresafe NZ also conduct sampling and surveying as a service, click here.

Textured Ceilings & Walls

Because of the way that textured or decorative ceilings were originally applied, some areas may contain asbestos while others don’t. To ensure a clear result 3 to 5 different areas of a room should be scraped into to single sample bag.  

Vinyl Flooring

Vinyl Flooring is often made with layers and can contain asbestos in three different product matrixes. Asbestos can be present in the top side of the vinyl that we walk on, it can also be present as backing paper underneath, or even the glue. So it’s important to get right down to the ground beneath. While the top layer is usually a low risk material, the paper backing beneath is high risk if asbestos is present, so ensure you wear a respirator. 

Cement Products

Cement products on houses built before 2000 often contain asbestos. Often these materials can be found used for house soffits, claddings, window panels and gable ends. 

Air Sampling & Fibre Counting

Air sampling requires specialist equipment and specific requirements must be met in order for fibre counting to be conducted. The laboratory undertakes air sampling and analysis in accordance with the Australian National Occupational Health and Safety Commission’s ‘Guidance note on the membrane filter method for estimating airborne asbestos fibres’ (NOHSC 3003:2005). The membrane filter method is the most widely used technique in assessing airborne respirable fibre in New Zealand. The testing involves sampling a known volume of air using as calibrated pump, with any airborne fibre collected captured by a membrane filter. The filter is then examined in the laboratory using a microscope, and the number of fibres present on the filter counted (hence the term ‘fibre-counting’). This allows us to estimate the concentration of fibres present in the air during the sampling period.

Contact us for further information if you require air testing or for further guidance. 

Click here for more information about interpreting your asbestos results. 

WP Feedback

Dive straight into the feedback!
Login below and you can start commenting using your own user instantly